Skip to main content
Fence Planner

Fence Planning Tools

Plan your fence from measurements to materials and costs.

Describe your fence once – runs, corners and gates – and get post positions, material quantities, concrete and an itemized estimate from the same set of measurements. No account, no guesswork about prices, and your project stays in your browser.

Top-down fence layout diagram1 run, 100 ft of fence line: 96 ft solid fence and 4 ft of gate openings. 15 posts in total: 2 end, 2 gate, 11 line. Shared corners are counted once.
  • End post
  • Corner post
  • Gate post
  • Line post
  • Junction (review) post
  • Fence
  • Gate opening

Not to survey accuracy. Letters mark layout points; small numbers are post numbers from the post schedule; grid lines are 10 ft apart.

Four calculators, one project

Each tool answers a different question, but they all read the same saved layout. Change a run in one and the post count, concrete and cost follow in the others.

How planning works

  1. Step 1

    Measure

    Enter each straight run in feet and inches. Runs that meet share one corner post.

  2. Step 2

    Place gates

    Set each gate by its distance along the run and the spacing between its two posts.

  3. Step 3

    Choose a fence type

    Wood, vinyl or chain-link, with the longest bay you will allow between posts.

  4. Step 4

    Check materials

    See every post by type and position, plus concrete and chain-link quantities.

  5. Step 5

    Add your prices

    Enter prices from your own supplier or contractor. Blank prices stay blank.

  6. Step 6

    Print or save

    Get an itemized estimate, a materials spreadsheet and a project file to re-open later.

A worked example

The diagram at the top of this page is a real result, not an illustration: a straight 100 ft chain-link line with one gate whose posts are 4 ft apart, starting 38 ft from point A, and a maximum post spacing of 8 ft. From those inputs the planner produces:

Results for the example layout
QuantityResultWhy
Solid fence96 ftThe 4 ft gate opening is not fence
Posts152 end, 2 gate, 11 line – none inside the gate
Bays135 of 7 ft 7 1/4 in and 8 of 7 ft 3 in
Chain-link fabric to order100.8 ftSolid footage plus 5% waste; 3 rolls of 50 ft
Top-rail pieces1010 ft 6 in pieces with a 6 in overlap at each joint; rounded up for each span between terminal posts (4 + 6)
Concrete30 bags18.00 cu ft for placeholder 10 in × 24 in holes, incl. 10% waste, at 0.6 cu ft per bag
CostNot providedThe example has no prices. Yours go in, and only yours.

The hole size in this example is a placeholder for arithmetic only. The planner never chooses a footing depth for you. Open the planner, choose the “Run with a gate” example, and replace the numbers with your own.

What to expect from these tools

Shown working

Every formula, rounding rule and reference value is written down on the methods and sources page, with the limits of each calculation.

Your prices only

The site does not know what materials or labor cost where you live and does not pretend to. A price you have not entered is shown as “Not provided”, never as $0.

Planning, not engineering

Results are estimates for planning and budgeting. They are not structural designs, code or permit advice. Read about this site and the privacy page for who runs it and how data is handled.